BMW M3 E36 Front Splitter — 1992–1999 Gloss Black

BMW M3 E36 Front Splitter — 1992–1999 Gloss Black

£89.99
Skip to product information
BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
  • BMW M3 E36 Front Splitter — 1992–1999 Gloss Black
BMW M3 E36 Front Splitter — 1992–1999 Gloss Black

BMW M3 E36 Front Splitter — 1992–1999 Gloss Black

£89.99

Give your E36 M3 a sharper, lower front end. This front splitter is shaped for the factory front bumper of the BMW M3 E36 (1992–1999) in Coupe, Saloon and Convertible form, extending the lower edge for a lower, more purposeful stance while taking the first knocks from kerbs and speed bumps instead of the bumper. Moulded from UV-stable ABS in a deep gloss black finish, it follows the bumper's original contour for a clean, period-correct look.

Fits

  • BMW M3 E36 Coupe (1992–1998)
  • BMW M3 E36 Saloon (1994–1998)
  • BMW M3 E36 Convertible (1994–1999)

Not compatible with

  • Standard BMW 3 Series E36 (non-M3) front bumper
  • BMW E36 Compact
  • BMW M3 E46 and later

⚠ Compatibility note: Shaped for the original M3 E36 front bumper. Please compare your bumper with the listing photos before ordering.

What's in the box

  • 1× Front Splitter — Gloss Black ABS (one piece, approx. 1630 × 440 × 50 mm)
  • Stainless steel screw mounting kit
  • Fitting manual

Key features

  • Vehicle-matched fit — moulded for the M3 E36 front bumper, gap-free along the full edge
  • One splitter for Coupe, Saloon and Convertible — the M3 front bumper is shared
  • Screw-fit — mounting holes are drilled into the bumper at the marked points; kit and manual included
  • UV-stable ABS — resists fading, warping and road debris
  • Paintable — can be colour-matched by any body shop

Installation

The splitter mounts to the lower edge of the front bumper using the supplied screw kit. Mounting holes are drilled into the bumper at the marked points — no cutting or trimming of the bumper is needed.

  1. Dry-fit the splitter and check alignment along the full bumper edge.
  2. Mark the mounting points using the splitter as a guide.
  3. Drill the marked points and secure with the supplied screws, working from the centre outwards.

Basic hand tools and a drill are needed (approx. 45–60 min). On older bumpers, check the lower edge for damage before fitting. Professional installation is recommended if unsure.

FAQ

Does it fit a standard E36 3 Series?
No. It is shaped for the M3 front bumper. A standard E36 bumper has a different lower section.

Does it fit the E36 Compact?
No. The Compact uses its own front bumper.

Is drilling required?
Yes. The splitter is screw-fitted: holes are drilled into the bumper at the marked points using the supplied kit.

Is it road legal in the UK?
Yes, when securely fitted and not obstructing lights or the number plate. Tell your insurer about any modification.

Complete the look

Pair it with matching AeroFinityWorks styling parts for the BMW E36.

You may also like